Table Top Kilns

for

Glassblowing, Fusing, Beadmaking,

Art Clay Silver and PMC

INCLUDES a small door mounted in the door. Use this for glass beadmaking or for quickly inserting or removing small pieces from the kiln. This kiln is 120 volts, 10 amps, 1200 Watts uses common available household electricity. Also available in 240 Volt for your country. Cost to run these kilns for one hour at half power is approximately 5 cents per hour, digital controller is included with this kiln and is made with insulating fiber. This kiln can also be used for ceramics, copper enameling, or many different uses. Maximum temperature is 1700 degrees F. All kilns should be kept 12" from any flammable materials.

Specifications

Overall Height	Outside Dimension	Inside Height	Dimension of kiln floor	Aprox Shiping Weight	Volts/Amps
15"	12" x 13"	6"	8" x 8	34 Lbs	120 / 10 or 240 Volts

Click here to download the manual for the Controller

Click here to down load instructions on how to use this kiln for:

• Glass Fusing and Slumping
• Silver and Gold Clay
• Enameling on Metal
• Ceramic Overglaze
• Lost Wax Burnout

The 5621 Kiln		Price
5621	Front Door kiln	$545
5621BR	Bead Rack for the 5621 Kiln	$20

---

Optional Bead Rack #5621BR

Perferated metal screen.

 

 

 

No exposed elements! Elements are below the surface of the fiber walls, so no danger of electrical shock from putting in your metal mandrels. Elements are in the back wall and two side walls for a more even heat distribution.

Click here to download the 19 page
instruction manual for this kiln

Three Button Digital Controller Comes Installed on this Kiln

---