Pipemakers Kit
for making glass pipes & sculptures
with National 6B Torch
Pipemakers Kit
for making glass pipes & sculptures
with National 6B Torch
Kit #420
This kit uses the two gas (oxygen and propane) 6B by National.
Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Use this kit when you want to be assured that you have the set of tools you need to make pipes.
(What you get is what is on the list below - the pictures may not be updated)
Kit #420 Includes:
- Torch an Gas Equipment
- National 6B Torcwith HT1 Tip (or select any other torch - look at the bottom of this page for your choices)
- Tools
- Hot Glass Shears
- Enhanced Didymium Safety Glasses! You can upgrade these glasses in this kit if you want, large frames, cool looking frames or to add additional protection for working with borosilicate glass or other applications. Click Here to see those glasses.
- Shade 3 Clip on Glasses adds more protection to the Didymium Glasses
- Tweezer Tube Holder #4519
- Tweezer Set of 2
- Graphite Table Pad
- Graphite Octagon Reamer
- Flameworkers stainless steel pliers
- Carbide Scoring Pen
- Set of Graphite Rods - 5 sizes
Due to products constantly coming, going and changing, and these kit lists are always being modified, we reserve the right to make minor subsituations to the kit. Example - we would subsitute one set of tweezers for a different set. The total value of the kits will remain about the same.
The discounted pricing listed below for this kit applies only when the complete kit is purchased - no subsitutions please.
The fastest way to get this kit is by calling toll free right now at 888-4HOTGLASS
.
Optional
Flashback Arrestors
Flashback Arrestors - This is not required to operate your
torch. It is a recommended safety device. In some rare situations,
a flame can travel back down a hose to the gas tank and cause
an explosion. This device helps prevent this reverse gas flow
and flashback. This device uses a reverse flow check valve and
a flame arrestor that stops this flashback flame. Packaged and
priced with both an oxygen and a propane arrestor. Gas flow is
in one direction only. Arrow showing gas flow dirction is stamped
on the side of the flashback arrestor.
Order number FA30 - $59
Oxygen Concentrator
|
Never have to buy Oxygen AGAIN!! Oxygen Concentrator $399 Click Here for Details |
|
You can subsitute the torch in this kit. Subsitute any torch we sell. We will adjust the price accordingly. Some sample torches are listed below.
 |
This Kit with the National 8M Torch |
$509 |
 |
This Kit with the Midrange Torch |
$549 |
 |
This Kit with the Major Burner Torch with pre-mix top torch |
$679 |
|
This Kit with the Red Max Torch |
now $769 |
 |
This Kit with the Red Rocket three tip model |
$1149 |
Let us pull a selection of Tubing and Colored Rod for you. We know exactly what you need. Choose $50 worth or $100 worth or $200.
Click here to see:
- more about Borosilicate clear glass rod and tubing and
- more about colored rod
Add to your kit:
Making Glass Pipes |
 |
How to Make Glass Beads - A a how to book by Cindy Jenkins - full color, low cost beginners book for the glass beadmaker - only $21.95 OR check out the incredible Passing the Flame Book for $75 Click Here to see the books! |
 |
Add some glass to your kit |
Propane Bottle Holder with work surface
All stainless steel.
Holds your propane bottle safely and at the correct angle for your torch.
Torch and propane tank not included.
We recommend the HotHead torch.
Includes a built in tool and glass rod rest.
Holder holds both the wide and narrow shaped gas tank.
Should be clamped or screwed to the table.
| Order # | Description | Price |
| 1618 | Propane / Mapp bottle holder and work surface 8" x 10" | $20.00 |
| 1620 | Propane / Mapp bottle holder and work surface 10-1/2" x 16" | $28.00 |
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
| No. | Size |
Description |
List Price | |
| 1631 | 9"x 11" |
Stainless Steel Work Surface - 9" x 11"
flat area, heavy .030" thick metal. One edge is bent so
you can wrap it over the edge of your work bench. The far edge
is also bent up right so you have a nice 9" long rest for
your colored glass rods.
|
$12.00 | |
 |
1617 | 12" x 13" | Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. | $16.00 |
 |
1633 | 24" x 13" |
Stainless Steel work surface - 24" x
13" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 24" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
 |
1635 | 14" x 23" |
Stainless Steel work surface - 14" x
23" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 14" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
| 1637 | 20" x 18" |
Stainless Steel work surface - 20" x
18" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 20" long rest for
your colored glass rods. No boxing fee.
|
$29.00 | |
 |
1639 | 22.5"x 28" | Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $45.00 |
| 1641 | 20"x 28" | Stainless Steel work surface with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $65.00 |
Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench
for easier grabbing, better organization, and to keep the glass rods cleaner.
The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
Item# |
Description |
Price |
| RRT8 | 8" Rod rest - fits inside 9" kilns or on your workbench | $5.00 |
| RRT9 | 9" Rod rest - fits inside 10" kilns or on your workbench | $6.00 |
| RRT17 | 16" Rod rest - fits inside 18" kilns or on your workbench | $11.00 |
Look in our index. Click on: Sitemap
Order Now
Catalogs