Kit# 6 for lamp workers and glass bead makers
Item# Kit6 - Price: $469.00
This kit uses the two gas (oxygen and propane) Minor Bench Burner by Nortel. Only $139 when purchased with this kit!
Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5.00 per month to rent the tank and about $15.00 to $35.00 each time you have it refilled. Click here to find out more about gas tanks. It costs about $1.00 per hour to run the Minor Burner torch.
Use this kit when you want to be assured that you have the most complete set of tools for the professional lamp worker and bead maker who wants to make glass beads, buttons and small sculptures.
The following items are included in the kit# 6:
- Minor Bench Burner by Nortel - only $139.00 (or select any other torch - look at the bottom of this page for your choices)
- Oxygen Regulator
- Propane Regulator click here for an important choice you need to make
- Twin Hose Set
- Sparklighter
- Didymium Safety Glasses - high quality enhanced didymium lens! You can upgrade these glasses in this kit if you want clip-ons, large frames, cool looking frames or to add additional protection for working with borosilicate glass or other applications. Click Here to see those glasses.
- Mandrel Release
- Mandrels - 1 dozen medium sized diameter
- Hand held graphite marvering paddle
- Graphite marvering pad for you table top
- An 8" glass rod support
- Glass rod cutter
- Set of 8 Diamond Dressing Bits
- Set of tweezers
- Shaping tools - set of FOUR (not 6)
- Tungsten Pick on a wood handle
- Torch mounted marvering pad
Actual products may differ from those pictured.
Free with purchase of this kit
- Mandrels - 1 dozen .062 small diameter
- Selection of Moretti Millefiori Glass Chips
- Sample of luster powders
- Sample of enamel powder
-
Great free design book of our choice, example below
Add an Oxygen
Concentrator
Never have to buy Oxygen AGAIN!! Oxygen Concentrator $475 Click Here for Details The Oxygen Regulator is not needed if you use an Oxygen Concentrator. We can remove the regulator from the kit and adjust the price of any kit. |
|
 |
||
 |
||
 |
||
|
||
|
 |
How to Make Glass Beads - A a how to book by Cindy Jenkins - full color, low cost beginners book for the glass beadmaker - only $21.95 OR check out the incredible Passing the Flame Book for $75 Click Here to see the books! |
 |
Propane Bottle Holder with work surface
All stainless steel.
Holds your propane bottle safely and at the correct angle for your torch.
Torch and propane tank not included.
We recommend the HotHead torch.
Includes a built in tool and glass rod rest.
Holder holds both the wide and narrow shaped gas tank.
Should be clamped or screwed to the table.
| Order # | Description | Price |
| 1618 | Propane / Mapp bottle holder and work surface 8" x 10" | $20.00 |
| 1620 | Propane / Mapp bottle holder and work surface 10-1/2" x 16" | $28.00 |
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
| No. | Size |
Description |
List Price | |
| 1631 | 9"x 11" |
Stainless Steel Work Surface - 9" x 11"
flat area, heavy .030" thick metal. One edge is bent so
you can wrap it over the edge of your work bench. The far edge
is also bent up right so you have a nice 9" long rest for
your colored glass rods.
|
$12.00 | |
 |
1617 | 12" x 13" | Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. | $16.00 |
 |
1633 | 24" x 13" |
Stainless Steel work surface - 24" x
13" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 24" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
 |
1635 | 14" x 23" |
Stainless Steel work surface - 14" x
23" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 14" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
| 1637 | 20" x 18" |
Stainless Steel work surface - 20" x
18" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 20" long rest for
your colored glass rods. No boxing fee.
|
$29.00 | |
 |
1639 | 22.5"x 28" | Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $45.00 |
| 1641 | 20"x 28" | Stainless Steel work surface with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $65.00 |
Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench
for easier grabbing, better organization, and to keep the glass rods cleaner.
The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
Item# |
Description |
Price |
| RRT8 | 8" Rod rest - fits inside 9" kilns or on your workbench | $5.00 |
| RRT9 | 9" Rod rest - fits inside 10" kilns or on your workbench | $6.00 |
| RRT17 | 16" Rod rest - fits inside 18" kilns or on your workbench | $11.00 |
Look in our index. Click on: Sitemap
Order Now
Catalogs