Kits for Lampworkers and Glass Beadmakers
Kit #4 with the Minor Burner Torch by Nortel.
Connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Rent an oxygen tank at your local welding supply store. Typically costing $5 per month to rent the tank and $15 to $35 each time you have it refilled. It costs about $1 per hour to run the Minor Burner torch.
Kit #4 Includes:
- Minor Bench Burner - by Nortel
Torch is Only $139 when purchased in this kit!! - Oxygen Regulator - Quality American Made!
- Propane Regulator - Quality American Made!click here for an important choice you need to make
- Twin Hose Set - High Quality "T" Grade Hose
- Sparklighter
| Our Kit Price | $299 |
| Our price if items are purchased separately | $323 |
| Our competitors "SALE" price - same exact items | $325 |
| Our competitors regular kit price - same exact items | $375 |
All for only $299
Oxygen Concentrator
|
Never buy Oxygen AGAIN!! Oxygen Concentrator $475 Click Here for Details The Oxygen Regulator is not needed if you use an Oxygen Concentrator. We can remove the regulator from the kit and adjust the price of the kit. |
|
You can substitute the torch in this kit. Substitute any torch we sell.
We will adjust the price accordingly. Some sample torches are listed below.
 |
This Kit with the Minor Burner Torch | $299 |
|
Bobcat by Torch Technology |
$329 | |
| Lynx atby Torch Technology | $565 | |
 |
This Kit with the Bethlehem Betta Torch Click Here to see all about this torch. |
$479 |
 |
This Kit with the Midrange Torch | $429 |
 |
This Kit with the Major Burner Torch with Surface Mix Torch Mount | $529 |
 |
This Kit with the National 8MT Torch |
$319 |
 |
This Kit with National 8M +HTC3 Tip
- If you are working only with borosilicate
(Pyrex) consider upgrading your torch to a National 8M with adaptor
and HT3 Tip. See more about this torch. |
$325 |
|
This Kit with the Red Max Torch | $576 |
|
|
This Kit with the Red Max Torch | $576 |
| This Kit with the Red Rocket | $958 |
We recommend that you add the following to your kit:
 |
How to Make Glass Beads - A a how to book by Cindy Jenkins - full color, low cost first beginners book for the glass beadmaker OR check out the incredible Passing the Flame Book Click Here to see the books! |
 |
Add some glass to your kit |
Propane Bottle Holder with work surface
All stainless steel.
Holds your propane bottle safely and at the correct angle for your torch.
Torch and propane tank not included.
We recommend the HotHead torch.
Includes a built in tool and glass rod rest.
Holder holds both the wide and narrow shaped gas tank.
Should be clamped or screwed to the table.
| Order # | Description | Price |
| 1618 | Propane / Mapp bottle holder and work surface 8" x 10" | $20.00 |
| 1620 | Propane / Mapp bottle holder and work surface 10-1/2" x 16" | $28.00 |
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
| No. | Size |
Description |
List Price | |
| 1631 | 9"x 11" |
Stainless Steel Work Surface - 9" x 11"
flat area, heavy .030" thick metal. One edge is bent so
you can wrap it over the edge of your work bench. The far edge
is also bent up right so you have a nice 9" long rest for
your colored glass rods.
|
$12.00 | |
 |
1617 | 12" x 13" | Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. | $16.00 |
 |
1633 | 24" x 13" |
Stainless Steel work surface - 24" x
13" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 24" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
 |
1635 | 14" x 23" |
Stainless Steel work surface - 14" x
23" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 14" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
| 1637 | 20" x 18" |
Stainless Steel work surface - 20" x
18" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 20" long rest for
your colored glass rods. No boxing fee.
|
$29.00 | |
 |
1639 | 22.5"x 28" | Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $45.00 |
| 1641 | 20"x 28" | Stainless Steel work surface with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $65.00 |
Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench
for easier grabbing, better organization, and to keep the glass rods cleaner.
The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
Item# |
Description |
Price |
| RRT8 | 8" Rod rest - fits inside 9" kilns or on your workbench | $5.00 |
| RRT9 | 9" Rod rest - fits inside 10" kilns or on your workbench | $6.00 |
| RRT17 | 16" Rod rest - fits inside 18" kilns or on your workbench | $11.00 |
Look in our index. Click on: Sitemap
Order Now
Catalogs