Professional Flameworkers Kit
for making glass beads, marbles, vessels & sculptures
Kit #10
This kit with the two gas (oxygen and propane) Major Bench Burner by Nortel. Two choices - Surface mix or Pre Mix. if you do not know which one, call us so we can explain the difference or choose the surface mix which works for all types of glass.
Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Click here to find out more about gas tanks. It costs about $1 to $2 per hour to run the Major Burner torch.
Use this kit when you want to be assured that you have the most complete set of tools for the professional beadmaker. This equipment can also be used buttons, marbles, vessels and sculptures. Because items in this kit change slightly from time to time and our picture doesn't change there may be differences.
(What you get is what is on the list below - the pictures may not be updated)
|
The discounted pricing listed below for this kit applies only when the complete kit is purchased - no substitutions please other than changing the torch or upgrading your safety glasses.
You can substitute the torch in this kit. Substitute any torch we sell. We will adjust the price accordingly. Some sample torches are listed below.
Price below is adjusted if torch accessories are different than the Major Burner Torch Accessories.
Example there may not be a torch mounted marvering pad with every torch listed below or extra tips required or special hose fittings required, etc
 |
This Kit with the Minor Burner Torch |
$599 |
 |
This Kit with the National 8MT Torch |
$695 |
 |
This Kit with the National 8M Torch |
$685 |
 |
This Kit with the Midrange Torch |
|
 |
This Kit with the Red Max Torch |
|
 |
This Kit with the Barracuda Torch |
$1329 |
| This Kit with the Carlisle Torch - Ball and Post | $1799 | |
| This Kit with the Carlisle Torch - Rack and Pinion | $1919 | |
| This Kit with the Red Rocket - all three tips | $1295 |
Propane Bottle Holder with work surface
All stainless steel.
Holds your propane bottle safely and at the correct angle for your torch.
Torch and propane tank not included.
We recommend the HotHead torch.
Includes a built in tool and glass rod rest.
Holder holds both the wide and narrow shaped gas tank.
Should be clamped or screwed to the table.
| Order # | Description | Price |
| 1618 | Propane / Mapp bottle holder and work surface 8" x 10" | $20.00 |
| 1620 | Propane / Mapp bottle holder and work surface 10-1/2" x 16" | $28.00 |
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
| No. | Size |
Description |
List Price | |
| 1631 | 9"x 11" |
Stainless Steel Work Surface - 9" x 11"
flat area, heavy .030" thick metal. One edge is bent so
you can wrap it over the edge of your work bench. The far edge
is also bent up right so you have a nice 9" long rest for
your colored glass rods.
|
$12.00 | |
 |
1617 | 12" x 13" | Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. | $16.00 |
 |
1633 | 24" x 13" |
Stainless Steel work surface - 24" x
13" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 24" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
 |
1635 | 14" x 23" |
Stainless Steel work surface - 14" x
23" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 14" long rest for
your colored glass rods. No boxing fee.
|
$29.00 |
| 1637 | 20" x 18" |
Stainless Steel work surface - 20" x
18" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 20" long rest for
your colored glass rods. No boxing fee.
|
$29.00 | |
 |
1639 | 22.5"x 28" | Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $45.00 |
| 1641 | 20"x 28" | Stainless Steel work surface with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. | $65.00 |
Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench
for easier grabbing, better organization, and to keep the glass rods cleaner.
The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
Item# |
Description |
Price |
| RRT8 | 8" Rod rest - fits inside 9" kilns or on your workbench | $5.00 |
| RRT9 | 9" Rod rest - fits inside 10" kilns or on your workbench | $6.00 |
| RRT17 | 16" Rod rest - fits inside 18" kilns or on your workbench | $11.00 |
Look in our index. Click on: Sitemap
Order Now
Catalogs