Supplies and Decorative Accessory Items
for
Flameworking, Lampworking & Glass Beadmaking
Luster Powders
Used to add sparkle or hi-lite
to glass. To use, place powder on your work bench, graphite marvering
pad or in a small bowl. Roll or dip your glass into the powder.
Blow off excess and replace the bead into the flame to fuse the
luster powder into the glass, will not fully melt into the glass.
Do not overheat, metallic sheen will burn off, leaving a white
residue. Luster powders are high temperature minerals. It actually
never melts but just sticks to the molten glass, and therefore
has minimal compatibility problems and works for all kinds of
glass, hard or soft. Place an order
now.
Packaged and priced by 25 gram
lots.
| Order No. | Finish | Color | Price |
| L25 | Sparkle | Gold | $4 |
| L26 | Sparkle | Copper | $4 |
| L27 | Sparkle | White | $4 |
| L28 | Sparkle | Dark gold | $5 |
| L29 | Sparkle | Red | $5 |
| L30 | Sparkle | Silver | $6 |
| L31 | Sparkle | Teal | $7 |
| L32 | Supersparkle | Clear | $4 |
| L33 | Hi-Lite | Red | $5 |
| L34 | Hi-Lite | Blue | $5 |
| L35 | Hi-Lite | Green | $5 |
| L36 | Hi-Lite | Gold | $5 |
| L37 | Hi-Lite | Violet | $5 |
Enamel Powders
Our enamel manufacture is now making colored enamels that are compatible with Effetre (Moretti) Glass!. COE 104 This is used to easily apply a thin coating of color or to add a tiny dot pattern to glass. To use, place powder on your work bench on a graphite marvering pad or in a small bowl. Roll or dip your glass into the powder. Put the glass back into the torch flame and melt into the glass surface. Surface can then be encased with a transparent glass for yet another effect. One Ounce of Powder Place an order now.
| Order # | Description | Price |
| SAMPG | Sample Pack - one of each color including the new transparent colors-46 at time i'm writing this - more as new colors are made - 12 grams per color | $49 |
| Order # | New Transparents | Price |
| 9434 | Gem Green | $4 |
| 9436 | Glass Green | $4 |
| 9443 | Beryl Green | $4 |
| 9444 | Turquoise | $4 |
| 9452 | Aqua Blue | $4 |
| 9453 | Water Blue | $4 |
| 9463 | Bonnet Blue | $4 |
| 9466 | Nitric Blue | $4 |
| Order # | Opaque Colors | Price |
| 9010 | White | $4 |
| 9105 | Yellow Beige | $4 |
| 9110 | Brown Beige | $4 |
| 9180 | Dark Coffee | $4 |
| 9250 | Goldenrod | $4 |
| 9260 | Praseodymium Yellow | $4 |
| 9320 | Gray Green | $4 |
| 9330 | Apple Green | $4 |
| 9350 | Moss Green | $4 |
| 9520 | Gray Blue Green | $4 |
| 9530 | Blue Green | $5 |
| 9550 | Aqua Marine | $5 |
| 9605 | Baby Blue | $4 |
| 9620 | Medium Blue | $5 |
| 9650 | Oxford Blue | $5 |
| 9660 | Brilliant Blue | $5 |
| 9710 | Light Petal Pink | $6 |
| 9720 | Dark Petal Pink | $6 |
| 9725 | Flesh | $6 |
| 9730 | Pink Flesh | $6 |
| 9740 | New Purple | $5 |
| 9760 | Light Orchid | $5 |
| 9780 | Dark Orchid | $5 |
| 9790 | Dark Purple | $5 |
| 9810 | Peach | $5 |
| 9830 | Melon Orange | $6 |
| 9835 | Orange Red | $6 |
| 9840 | Bright Red | $6 |
| 9850 | Dark Red | $6 |
| 9920 | Light Oxford | $4 |
| 9940 | Oxford Gray | $4 |
| 9990 | Midnight Black | $4 |
Gold, Silver and Palladium
Very thin squares of the real
thing.Place small pieces of this
metal on your graphite margering pad and roll your bead across
it to pick it up. Be careful, the direct flame will melt away
the metal. Cover the metal with dabs of transparent glass. Don't be
fooled with the commonly available inexpensive leaf that is only colored
aluminum. Aproximate Sheet Sizes are 3-3/8" to 3-3/4" Square. Place an order now.
| Order # | Metal | # of sheets | Price |
| 16502 | Silver Leaf (very thin) | 25 | $9.50 |
| 16503 | Heavy Silver Leaf (medium thickness)-a thin Foil* | 25 | $23 |
| GL25 | Gold Leaf 22Kt Very Thin | 25 | $39 |
| 16522 | Gold Leaf 23Kt Medium Thick** | 10 | $54 |
| PL25 | Palladium Leaf (thin) | 25 | $89 |
*Some of our competitors are selling
this item as "FOIL"
**Average weight
of 65g/1000 leaves
Liquid Gold
Two gram bottle. Paint on you finished bead and fire in you kiln to 1100 degrees F.
The White gold is the "silver" color.
| Order # | Description | Price |
| LG2 | Liquid Gold | $15.50 |
| LWG2 | Liquid White Gold | $15.50 |
Gold and Silver Wire
for fuming glass
| Order # | Metal | Wire Gauge | Minimum order per metal | Price Per Inch |
| WS16 | Silver Wire | 16 GA | 4 Inches | $3.75 |
| WG22 | Gold Wire | 22 GA | 2 inches | $8.75 |
Iridizing Spray
Chemical to iridize glass beads, marbles, sculptures,
pipes, anything glass. Less toxic and less corrosive than all
other iridizing chemicals like stannous chloride solution Bullseye
Glass uses to irridize their glass. Good results are achieved
when the glass is a low 1000 degree F. when sprayed. An air brush
seems to work the best for applying, but has an annoying tendency
to clog nozzles. Therefore it is best to use the simple type
of airbrushes that are easy to clean like the ones we sell. Always
use adequate ventilation.
How to use: When you are done working the glass on a torch, quickly transport the glowing glass to the spray area. When the glow is gone spray the glass. A small amount of spray gives a silver finish. More spray brings out more colors. Put glass directly into the annealing kiln. Do not reheat or the finish will burn off and you will have to respray.
Can only be shipped by ground in the continental USA. Must be sent in its own box without any other items.
| # | Product | Description | Price |
| 4010 | Iridizing Liquid |
1 pound liquid (aprox 1 quart) | $47 |
Etching Cream
| Order # | Description | Price |
| 53003 | Etching Cream | $7.95 |
| 53004 | Etching Cream - 12 oz. | $17.95 |
Goldstone Adventurine
Aventurine is used in making glass
rods. They look like chunks of rock. Great for making stringers
and decorating beads. Pieces vary in size. The chips in the picture
is about 1 Ounce. Available in 2 sizes.
Stringers can be made by picking
up a chip, encasing it in clear, pull and marver to desired length
and diameter.
| Order# | Description | Qty | Price |
| 99901 | Goldstone Chips | 1 Ounce | $8 |
| 99903 | Goldstone Chips | 1/2 Pound | $32 |
| 99904 | Goldstone Chunks | 1 Ounce | $8 |
| 99906 | Goldstone Chunks | 1/2 Pound | $32 |
| 99910 | Bluestone Chunks | 1 Ounce | $8 |
Mandrel Release
Coat metal mandrels with this release to
prevent the molten glass from sticking to the metal mandrels.
We believe the best bead release made is Blue Coat! If you are
not sure which to get - get the Blue Coat!
Click here to learn how to use mandrel release.
| Order # | Name | Amount | Holding power | Retail Price |
| BLK4 | Black Coat | .55 lbs* | Regular | $9 |
| BLK16 | Black Coat | 2 lbs | Regular | $24 |
| BLK10 | Black Coat** | 10 lbs | Regular** | $49 |
| If you are not sure which one - We recommend the below Blue Coat ! | ||||
| BLUE4 | Blue Coat | .55 lbs* | Medium | $12 |
| BLUE16 | Blue Coat | 2 lbs | Medium | $24 |
| BLUE10 | Blue Coat** | 10 lbs | Medium** | $49 |
| PINK4 | Pink Coat | .55 lbs* | Tough | $12 |
| 1590 | Flame Dry | .55 lbs* | Regular | $12 |
| 1591 | Flame Dry | 1.85 lbs | Regular | $19 |
|
Regular
- Easiest to remove the bead from the mandrel when cooled but
then also easiest to detach when working in the flame. Medium - Medium holding power and medium removability. Tough - When you really need to be sure the release does not detach from the mandrel when working large beads or boro beads or beads that take a long time to make - Therefore hardest to remove the bead from the mandrel when cooled. Flame Dry - Dries immediately in the flame. No need to pre dry. Similar to regular holding release. |
*To give you an idea of volume .55 pounds fits inside a 4 fluid ounce jar (200 grams)
**Thick mud - you dilute with water
Order Now
Catalogs
